Damme 3

Primary tabs

Location

General informations:

Administrative Information
Operator: 
EMPG
Permits granted: 
2008
Permitting authorities: 
Bergamt Meppen
Administrative country&region&county: 
  • Germany
  • NIEDERSACHSEN
  • Weser-Ems
Geological Information
Location: 
Latitude: 52.492331000000
Longitude: 8.260480000000
Geological Formation: 
Unterkreide
Operational Information
Main Category: 
Shale Gas Wells
Borehole direction: 
Vertical
Drilling Status: 
Completed
Hydraulic Fracturing Depth: 
1501 m
Type and volume of well stimulation: 
Hydraulic Fracturing
Date of Well Stimulation: 
2008
Date of First Well Stimulation: 
November 2008
Date of Second Well Stimulation: 
November 2008
Date of Third Well Stimulation: 
November 2008
Environmental information
EIA/Screening: 
No
Baseline, Monitoring Report: 
m
Incidents (causes, consequences and remediation; per well): 
Yes
Total volume of water used for the fracturing: 
12095 m3
Other Information
Other comments: 
http://www.researchgate.net/publication/257794753_Hydraulic_fracturing_wastewater_in_Germany_Composition_treatment_concerns

Monitoring:

Monitoring 1

Volume of water used for the fracturing, m3: 
12095.00 m3
Propant
Volume of proppant used, t: 
588.00 t
Proppant max mass % of total hydraulic fracturing fluid: 
4.63 %
Composition of the fracturing fluid, Ingredients, %
Water: 
95.2147 %
Magnesium nitrate: 
0.0004 %
5-Chloro-2-methyl-3(2H)-isothiazolone and 2-methyl-3(2H)-isothiazolone: 
0.0004 %
Distillates (petroleum), hydrotreated light: 
0.0208 %
Tetramethylammonium chloride: 
0.0501 %
Ethoxylated octylphenol: 
0.0346 %
Magnesium chloride: 
0.0002 %
Sum of all unknown Substances: 
0.0500 %
Total amount of fracturing fluid, m3: 
12702.90 m3
Custom chemical substances: 
Pressure applied during high-volume fracturing, bar
Underground pressure, bar: 
150.00 bar
Wellhead pressure, bar: 
5.00 bar
Fluids, emerging at the surface following high-volume hydraulic fracturing
Chemical characteristics flowback water
Sulphate: 
8.00 mg/L
Barium: 
455.0000 mg/L
Calcium: 
14120.00 mg/L
Chloride: 
78229.00 mg/L
Chromium: 
0.3000 mg/L
Iron: 
91.0000 mg/L
Potassium: 
110.00 mg/L
Lead: 
1.0000 mg/L
Lithium: 
5.0000 µg/L
Magnesium: 
1799.0000 mg/L
Manganese: 
2.5000 mg/L
Nickel: 
1.0000 mg/L
Sodium: 
30582.0000 mg/L
Strontium: 
1455.0000 mg/L
Zinc: 
0.4000 mg/L

Charts:

Volume of water used for the fracturing

Composition of the fracturing fluid - Monitoring1

Composition of the fracturing fluid - Monitoring2

Reports:

AttachmentSize
PDF icon Monitoring information62.88 KB